Function Settings; Select The Item And Change The Value - Yamaha PSR-E233 Owner's Manual

Function Settings

The [FUNCTION] button gives you access to a variety of operations related to adjusting
or enhancing the sound and making settings for connection to external devices.
For more about the available functions, see the following Function Setting List.

Select the item and change the value

1
Press the [FUNCTION] button a number of times until the
desired item appears.
Each time the [FUNCTION] button is pressed, the Function number increases
one by one.
You can also decrease the Function number by one when you press the [-] but-
ton briefly while holding down the [FUNCTION] button.
If the Function includes sub-modes, the Function item appears in the display for
a few seconds, and the sub-modes will be displayed.
2
Set the value by using the number buttons [0]–[9], [+], [-].
• Decrement value by 1.
• No
• Off
28
PSR-E233/YPT-230 Owner's Manual
Value Function item
StyleVol
100
001
Direct numeric entry.
• Increment value by 1.
• Yes
• On
Press simultaneously to
recall the default setting.
NOTE
• The Function number will
not appear in the display
during Song, Style or metro-
nome playback. The mea-
sure will appear instead.
Function number
NOTE
• Any settings will be restored
to the factory default settings
when the power is turned
off.
• To exit the Function settings,
press one of these buttons;
[SONG], [VOICE],[STYLE]
or [GRAND PIANO].