OPERATION
On switching on the unit the STATUS indicator on the front of the unit should turn GREEN if all
is OK.
The modules are inserted from the rear of the DBUH/DLAH, please refer to the DBUH/DLAH
datasheet for the inserted modules' performance.
Menu Structure
On Power up the unit will start in HOME mode displaying the following options.
Generally YES will select/enable an item and NO will step back one step with no changes.
The unit's HOME screen has 5 main menu options as shown in Figure 1 below:
Operating display
This menu shows a graphical representation of the RF path and attenuation values, the screen
is different if the unit is fitted with the redundancy option.
Status
This menu shows an immediate summary of all settings and alarm conditions, more details
may be available by pressing the down arrow, left and right arrows cycle through the attached
trays.
Issue 3.20
DBUH / DLAH / DTLH Installation and Operation Handbook
Figure 1
Figure 2
Figure 3
Page 7