Table of Contents
Advertisement
Setup
This menu, as shown in figure 14, is hidden and shouldn't normally be used by operators.
However this is the menu that allows the resetting of passwords / communities, as well as
toggling the passwords on / off.
In order to get to this setup menu, the user presses keys 0 then 9 from the HOME menu.
Figure 14
1 Initial Setup – Allows the initial setup of the unit, this
SHOULD NOT BE USED BY
CUSTOMERS AS A BAD SETUP MAY CAUSE PERMANENT UNIT DAMAGE.
2 Serial Number – Allows the setting of the unit's serial number.
3 Modify Parameters - Allows modification of certain unit parameters.
DO NOT USE
4 Program Checksum – Calculates the firmware checksum.
5 Reset Passwords – Resets all the passwords and community names back to their default
values, and turns the passwords / security off.
6 Toggle Passwords – Toggles the passwords / security on / off.
Menu items 5 & 6 are not available in Non Ethernet based units.
Issue 3.20
DBUH / DLAH / DTLH Installation and Operation Handbook
Page 13
Advertisement
Table of Contents
