AKA SIGNUM MFD 7272M GT Manual page 25

Discriminating metal detector
Table of Contents

Advertisement

Departement of international trade:
those objects that fall in the clear Hodograph area while targets that fall
within the hatched area will not generate an audio response.
Attention!
When using the RT-ST sound indication type in discrimination
mode for discriminated targets (hodographs from which fall into the shaded
area), the device will respond with the sound of only the detection channel
(RT). If at the same time the sound of the RT interferes, then to implement
the "silent search" mode, set the type of sound indication of the RTL-ST,
reducing the sensitivity of the RT to a comfortable value.
To configure the discrimination, click
the left and right edges of the search
desired area (level) of discrimination.
At the top left and top right of the screen are the
current values of the search sector. These are in
degrees of inclination relative to the vertical axis
of the screen.
The currently selected border sector is highlighted
by a rectangular frame (fig. 10)
To change the position of the border sector use the search buttons
and
As already noted in the discrimination mode, due to the influence of the
soil, there is a risk of missing objects if the search sector borders are set
too narrow. We do not recommend setting it at 20-25 degrees
To exit discrimination click
https://aka-md.com
| +74957991510 |
To set up another border sector click
akadetector@yandex.ru
Now, by positioning
sector you can set the
Fig. 10
25

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for AKA SIGNUM MFD 7272M GT

This manual is also suitable for:

Signum mfd 7272m classikSignum mfd 7272m icb

Table of Contents