Using Usb Flash Memory - Yamaha PORTATONE PSR-S500 Owner's Manual

Using USB Flash Memory

Using USB Flash Memory
1
Connect a USB flash memory to the
USB TO DEVICE terminal, being careful
to insert it in the proper direction. (Do
not try to force an improper connec-
tion.)
IMPORTANT
• In order to play songs copied to a USB flash memory from a
computer or other device, the songs must be stored either in
the USB flash memory's root directory or a first-level/second-
level folder in the root directory. Songs stored in these location
can be selected and played as USB song (page 28). Songs
stored in third-level-folders created inside a second-level folder
cannot be selected and played by this instrument.
USB flash memory (Root)
Song
File
Song
Folder
Folder
root
74
PSR-S500 Owner's Manual
Song
Can be
File
selected/
played.
Song
Song
File
Cannot be
Song
selected/
Folder
played.
2
Check that the "CONNECT" message is
shown in the MAIN display.
You can go to the FILE CONTROL display
from which you can access USB flash memory
operations by pressing the [MENU] button
from this display.
(Do not press this button now, but only when
instructed to in the sections below.)
Menu
Format
Save
SMF Save
Load
Delete
A message (information or confirmation
dialog) sometimes appears in the display to
facilitate operation. Refer to the "Messages"
section on page 96 for an explanation of each
message.
NOTE
• No sound will be produced if you play the keyboard while the FILE
CONTROL display is showing. Also, in this state only buttons related
to file functions will be active.
NOTE
• The FILE CONTROL display will not appear in any of the following
cases:
• During style or song playback.
• While data is being loaded from a USB flash memory.
CONNECT
Reference Page
75
76
77
78
79