Muting Independent Song Parts; Display - Yamaha PORTATONE PSR-S500 Owner's Manual

Song Settings

Muting Independent Song Parts

Each "track" of a Song plays a different part of the Song—melody, percussion, accompaniment, etc.
You can mute individual tracks and play the muted part on the keyboard yourself, or simply mute tracks
other than the ones you want to listen to.
Use the [REGIST/TRACK] button to select the TR 1–8, TR 9–16 or ACMP.TR and use the REGISTRA-
TION MEMORY [1]–[8] buttons to mute or un-mute the corresponding tracks ([1]–[8], [9]–[16] or
ACMP). The border around the track number in the display disappears when that track is muted.
Refer to page 32 for information about the Song track configuration.
1
Press the [REGIST/TRACK] button until
the desired track is shown on the dis-
play, and then select the track.
The following items appear on the display
when you press the [REGIST/TRACK] button.
➝
"REGIST" "TR 1–8"
"ACMP.TR"
66
PSR-S500 Owner's Manual
Track number without border ... Track contains data but is muted.
Track number with border ... Track contains data and is not muted.
➝
"TR 9–16" or
REGIST.
TR 1 – 8
TR 9 – 16
(ACMP. TR)
No track number ... No data.
2
Press the desired REGISTRATION MEM-
ORY [1]–[8] buttons to set the mute
track.
To cancel the mute, press the appropriate REG-
ISTRATION MEMORY [1]–[8] buttons again.

Display

Specify the mute tracks of 1–8 by press-
TR 1–8
ing the [1]–[8] buttons.
Specify the mute tracks of 9–16 by
TR 9–16
pressing the [1]–[8] buttons.
Specify the mute track of ACMP by
ACMP.TR
pressing the [1] button.
Setting