Connecting A Personal Computer - Yamaha PORTATONE PSR-S500 Owner's Manual

Yamaha electronic keyboard user manual
Hide thumbs Also See for PORTATONE PSR-S500:
Table of Contents

Advertisement

Connections

Connecting a Personal Computer

The following functions become available when this instrument is connected to a computer.
● Performance data can be transferred between the instrument and the computer (page 83).
● Files can be transferred between the instrument and the computer (page 85).
The connection procedure is as follows:
1
Install the USB-MIDI driver on your
computer.
The USB-MIDI driver is included on the CD-
ROM.
Installation of the USB MIDI driver is
described on pages 91–92.
2
Connect the USB terminal of the com-
puter to the USB terminal on the instru-
ment using a standard USB cable (USB
cable sold separately).
The supplied CD-ROM also includes a Musicsoft
Downloader application that allows you to transfer
song files from your computer to the instrument's
flash memory. For instructions about how to install
Musicsoft Downloader and how to transfer song
files, see pages 85, 92.
Computer
82
PSR-S500 Owner's Manual
USB TO HOST terminal
Instrument
USB cable
■ USB Precautions
Please observe the following precautions when
connecting the instrument to a computer via a USB
cable.
Failure to do so can cause the instrument and/or the
computer to hang up (freeze), possibly causing
corruption or loss of data.
If the instrument or computer does hang up, turn
the power to both devices off and then on again,
and restart the computer.
CAUTION
• Wake the computer from a sleep/suspended/standby mode before
connecting the USB cable.
• Connect the USB cable to the instrument and computer before
turning power to the instrument on.
• Check the following points before turning the instrument's power
on or off, and before plugging or unplugging the USB cable.
• Quit all applications.
• Make sure that no data transfer is in progress. (Data is trans-
ferred whenever you play the keyboard or play a song.)
• Allow at least 6 seconds between turning the instrument's power
on and off, and between plugging and unplugging the USB cable.
• Directly connect the instrument to the computer using a single
USB cable. Do not use a USB hub.
NOTE
• The Musicsoft Downloader application may not be able to access the
instrument in the following cases:
• During style playback.
• During song playback.
• During a file control operation (while the FILE CONTROL display is
showing).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents