Large Installation Tips - Nanoleaf Shapes Hexagons User Manual

Large
Installation
Tips (1/2)
Problems & Solutions
Problems & Solutions
Nanoleaf Shapes – User Manual
1x
Each standard 42W PSU supports up to 21
hexagons (2W per panel).
Adjust Your Power Supplies for Optimal Performance
A
Activate Power Diagnostic Mode
1
If you have more than 21 panels and/or multiple Controllers in your Shapes setup, you
should try to distribute power supplies across your layout evenly. Activating Power
Diagnostic Mode will give you tips on where you can place your power supplies for
optimal performance. The options below will outline how this mode can be activated:
OPTION A: Activate with the Controller
1. On your Controller, hold the Dim (–) and Brighten (+) buttons down together for 5s.
2. A color-coded map of your panels will appear. The map will automatically
update as you connect or move, power supply units within your setup.
OPTION B: Activate with the Nanoleaf App
If your setup is already optimized, these warnings will not appear and Power Diagnostic
Mode will be inaccessible. If you wish to enable Power Diagnostic Mode anyway, the
button sequence on the Controller can be used see Option A).
For iOS Devices
1. Open the MORE menu.
2. Select SETTINGS >
WARNINGS > Power Limited
21x 1x
Each Controller supports
up to 500 hexagons.
For Android Devices
1.
2.
500x
Open the side menu.
Select SETTINGS >
WARNINGS > Power Limited
25