Advertisement
5) Operation of device
(3) Lighting LED head
LED head will be lit under the selected program conditions while #2 pin of D-Sub37 connector is ON.
Local / remote switching (1)
LED lighting (2)
(4) Individual lighting of each LED block
LED block of corresponding LED head will be lit under the selected program conditions while #9 to 13 pins
of D-Sub37 connector are ON.
Local / remote switching (1)
LED 1~5 ON (9~13)
Items to note)
If the dimming rate is set to 0% (no to be lit) condition in the corresponding program condition, this signal
will be ignored and LED will not be lit.
ON
ON
UV radiation
ON
ON
Corresponding block radiates UV.
- 33 -
Advertisement
