Basic Tools And Consumables - Agilent Technologies 7820A GC Site Preparation Manual

Basic Tools and Consumables

7820A GC Site Preparation Guide
The GC comes with a few basic tools and consumables
depending on the specific inlet and detector that you ordered.
Below is a general list of what comes with the instrument.
Table 12 Basic tools
Tool or consumable
7820A GC
FID flow measuring insert
Column cutter, ceramic or diamond
Inlet septa appropriate for type
Inlet insert or liner
Toolkit, 19199T
Tubing kit, 19199TF
Table 13 lists other useful tools not included with the GC.
Table 13 Useful tools not included with GC
Tool
Custom Tee, G3430-60009
ECD/TCD Detector plug, 5060-9055
1/8-inch Ball Valve, 0100-2144
Digital flow meter, Flow tracker 1000
Electronic gas leak detector
Electronic vial crimper
7820A GC Site Preparation
Used for
FID troubleshooting.
Column installation.
Inlet seal.
Contains sample during vaporization in
inlet.
Routine maintenance tasks
Preassembled tubing for installing
supply gases
Used for
Connecting the same gas to front and
back EPC module.
Inlet pressure decay test
Inlet pressure decay test (one per
inlet)
Verifying flows, checking for leaks and
plugs
Locating gas leaks; safety checks
when using Hydrogen
Assuring consistently air-tight vial
closure, regardless of who does the
crimping
1
25