Advertisement
MOUNTING THE SMARTPHONE
Step 1:
DO NOT TURN ON THE GIMBAL UNTIL YOU HAVE INSTALLED AND ADJUSTED THE SMARTPHONE.
ADJUSTING THE SMARTPHONE POSITION DURING OPERATION CAN CAUSE DAMAGE!
The gimbal is compatible with smartphones measuring between 6.5 - 8.5cm in width.
Slide the phone holder apart and slide the smartphone all the way right until it touches the tilt motor.
Step 2: Before turning on the gimbal, try to adjust the total weight as centred as possible so that the
smartphone is slightly horizontal. You can adjust the weight distribution with the adjustable arm (12).
The smartphone should also be placed far enough into the holder to avoid falling out.
POWERBANK:
CHARGING THE PHONE FROM THE GIMBAL
The USB power out port at the back of the gimbal can be
used for charging your smartphone/camera while
recording.
PLEASE NOTE:
An L-shape charging connector is required when the
smartphone is mounted horizontally on the mobile
holder.
EN
Advertisement
