Page 1
PT: Um manual em seu idioma pode ser encontrado na Internet: PL: Instrukcję w swoim języku możesz znaleźć na stronie: SWE: En handbok på ditt språk finns på Internet: NL: Een handleiding in uw taal vindt u op internet: www.easypix.info/download-manuals/download/gx2/...
Retaining instructions Read this manual and its safety instructions before using this product. Follow all the instructions. This will avoid fire, explosions, electric shocks or other hazards that may result in damage to property and/or severe or fatal injuries. The product shall only be used by persons who have fully read and understand the contents of this user manual.
Product introduction GX2 Gimbal is a 3-axis motorised gimbal for smartphones and is used when recording video. The GX2 uses electronic sensors to detect judder and shaking and compensates for these movements. This results in distortion-free high-quality recordings. The Bluetooth feature in GX2 allows you to connect the gimbal directly to your smartphone for remote operation.
Safety instructions WARNING This product is only suitable for the purpose described, the manufacturer is not liable for damage caused by abnormal use. WARNING Please read this instruction manual carefully before use. • Ensure the product is not obstructed during use as this may lead to damage of the internal motor mechanism.
Operating environment • Please keep this product away from children and pets. • Please store the product in a dry environment. • Do not overcharge or discharge the battery as this may damage the battery cells • Do not expose the device to abnormally high or low temperatures.
Step 1: Using your gimbal 1. Please do not switch on the device before attaching your smartphone as doing so will not allow the device to calibrate properly before use. 2. Please charge the product fully, before first use. 3. Please unlock the three-axis limiter before power on and using. 4.
Step 3: Charging • Your gimbal can be charged using the micro USB cable provided. • Connect one end the cable to the micro USB port on the side of the gimbal and the other end of the cable into a computer or USB charger.
Step 4: Inserting the smartphone Carefully expand the smartphone cradle and insert your smartphone. While keeping the smartphone in a horizontal position, slide it into the cradle until it is centred as illustrated below. Step 5: Switch on/off the product SWITCH ON: Press the function/power button for 3-4 seconds until the indicator light flashes...
Step 6: Changing the orientation Short-press the power button to change the smartphone position from horizontal to vertical. Set back to start position Short press the mode button twice to revert the smartphone back to the original position. This works for both horizontal and vertical orientations.
Switching between the modes Please use the Mode Button to switch between the 3 modes. Each press of the mode button engages the next mode in the cycle. Note: If you short press the button twice, the gimbal will return to the start position.
Button operation Power button Function Single press Vertical/horizontal orientation Camera direction switch Double press (in connection with App only) Photo/video shooting switch Triple press (in connection with App only) Mode button Function Switch by single press: Switch between 3 modes: Single press Following Mode Second press...
Charging status Battery power Indicated by battery level LED’s One LED flashes 0%-25% First LED on, second LED flashes 25%-50% First and second LED’s on, third LED flashes 50%-75% Three LED’s on, fourth LED flashes. 75%-99% All four LED’s on 100% Connect to the smartphone (without App) You can take photos and videos using the gimbal's...
Connect to the “Gimbal Pro” App For additional functionality please scan the QR Code and download the „Gimbal Pro“ App to your smartphone: ANDROID 1. Activate the Bluetooth function on smartphone. 2. Open the smartphone Bluetooth settings 2. Connect to the device "STABILIZER_XXXXXX”. 3.
Technical specifications Tilt angle 160° Roll angle 325° Pan angle 340° Bluetooth Bluetooth 5.0 App control Face tracking Diagonal: max. 18 cm Compatible smartphone Thickness: max. 0.9 cm dimensions Width: max. 5.5-9 cm Battery 2000mAh built-in Operating voltage 3.7V Input voltage/currency 5V / 1A Working time 4,5-5 hours...
• Pouch • USB cable • Manual EN/DE Manuals in further languages are available for download here: www.easypix.info/download-manuals/download/gx2/ NOTICE Devices containing built-in batteries should be disposed of in accordance with applicable local regulations, and you should not throw them into household garbage to avoid irreversible pollution.
The recycling of materials will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and environment. Declaration of conformity The EC Declaration of Conformity for GX2 Gimbal can be downloaded here: www.easypix.info/download/pdf/doc_gx2.pdf...
Need help?
Do you have a question about the GoXtreme GX2 and is the answer not in the manual?
Questions and answers