Advertisement
7. Power on/off and Mode Button
Power on/off: Press and hold the button for 3 seconds until the three lights (6.1 )(6.2)(6.3) flash blue.
Mode Button: Single press to switch between the modes.
Press 2 times to bring the camera to its original position.
8. Zoom Control
9. Holder Adjustment
10. Roll Motor: Allows the gimbal to rotate 160° vertically
11 Balance Screw: Adjusts the balance and distribution of the weight of the smartphone/camera while
mounted in the gimbal.
12. Adjustable Arm: Pull out or push the adjustable arm until the smartphone balances itself.
13. Tilt Motor: Allows your smartphone/camera to rotate 330° horizontally
14. USB Power Out: For charging the smartphone/camera directly from the gimbal (via USB cable)
15. Micro USB Port: For charging the gimbal battery by connecting it (via USB cable) to a computer or
phone charger.
16. Shutter Button: Press once to capture picture and video.
17. 1/4 Thread Screw
CHARGING & POWERBANK
CHARGING THE GIMBAL BATTERY
Connect the charger cable port on the side
of gimbal's handle to a power source such
as a power pack (not included) or a
computer or phone charger to charge the
gimbal battery.
PLEASE NOTE: Do not charge the battery
immediately after use, when the gimbal
temperature may be too high. Let the
battery cool down to near room
temperature!
EN
Advertisement
