Page 1
EN // Please find a manual in your language online: PT // Um manual em seu idioma pode ser encontrado na Internet: http://www.easypix.info/download-manuals/download/goxtreme-gx1/ 3-AXIS STABILIZING GIMBAL / Compatible with action cams with max. size 6.5 x 4.5 x 2.7cm / / Compatible with smartphones with 6.5 - 8.5cm on narrow side /...
WARNING Do not turn on the gimbal until you have correctly installed and adjusted your smartphone or action cam. Adjusting the smartphone or action cam position during operation can cause damage! Please charge the gimbal fully before using for the first time. When mounting action cams please use the included action cam adapter.
Page 3
FUNCTIONS 9. Holder Adjustment 10. Roll Motor 1. Smartphone 11. Balance Screw 12. Adjustable Arm Holder 13. Tilt Motor 2. Pan Motor 5. Bluetooth Light 14.USB Power out 6.1 Pan and Tilt Mode 3.1 Battery > 66% 15.Micro USB Port 6.2 Pan Follow 3.2 Battery >...
Page 4
7. Power on/off and Mode Button Power on/off: Press and hold the button for 3 seconds until the three lights (6.1 )(6.2)(6.3) flash blue. Mode Button: Single press to switch between the modes. Press 2 times to bring the camera to its original position. 8.
Page 5
POWERBANK: CHARGING THE PHONE FROM THE GIMBAL The USB power out port at the back of the gimbal can be used for charging your smartphone/camera while recording. PLEASE NOTE: An L-shape charging connector is required when the smartphone is mounted horizontally on the mobile holder.
Page 6
Step 3: Switch on the gimbal by pressing the power button for 3 seconds. When turned on, the gimbal automatically aligns itself. MOUNTING THE ACTION CAM Step 1: Mount your cam in the included action cam adapter. Use the screws supplied to secure the camera to the adapter as shown in the image below: The adapter is compatible with action cams with a maximum dimensions: 6.5 x 4.5 x 2.7cm.
Step 3: Before turning on the gimbal, try to adjust the total weight as centred as possible so that the action cam adapter is slightly horizontal. You can adjust the weight distribution with the adjustable arm (12). Step 4: Switch on the gimbal by pressing the power button for 3 seconds. Then turn the camera forward by sliding the joystick (4) down.
2. PAN FOLLOW MODE 3. LOCK MODE 1. PAN & TILT Roll axis and tilt axis are All three axes are locked FOLLOW MODE locked and the smartphone and the smartphone won’t The roll axis is locked and follows the handle to move follow handle to move.
Page 9
2. MANUALLY SWITCHING THE MOUNT ORIENTATION Warning: To avoid the potential for permanent damage to the device, please ensure that the gimbal is switched off during the following steps. Loosen the adjustment screw (9) on the back of the holder, rotate the holder into a vertical position and slide the smartphone into the holder.
For technical help please visit our support area on www.easypix.eu. CONFORMITY The manufacturer hereby declares that the CE marking was applied to the product GoXtreme GX1 in accordance with the basic requirements and other relevant provisions of the following CE Directives:...
Page 11
DISPOSAL Dispose of packaging For disposal, separate packaging into different types. Cardboard and board must be disposed of as paper and foil must be recycled. Disposal of Waste Electrical and Electronic Equipment and/or Battery by users in private households in the European Union. This symbol on the product or on the packaging indicates that this cannot be disposed of as a household waste.
Need help?
Do you have a question about the GoXtreme GX1 and is the answer not in the manual?
Questions and answers