Flow; Why Can't I See Mass Flow Or Individual Flow Levels; Why Am I Experiencing A Lot Of Variance In The Flow Level Of The Manifolds; What Do I Do If The Mass Flow Number Is Abnormal - IntelligentAg RECON Troubleshooting Manual

Why can't I see mass flow or individual flow levels?

1. Restart the app.
a. Double-click the Home button.
b. Swipe right until you have located the app.
c. Swipe up on the app's preview to close it.
d. Press the Home button to return back to your home screen.
e. Re-open the app.
2. Check for app updates in the App Store. You must be connected to a home Wi Fi
network (not the IASBlockage or IASNetwork2 network). If an update is available,
download it.
3. Ensure that your iPad meets the specifications in the iPad Buying Guide at
www.intelligentag.com/support/ipad-buying-guide.

Why am I experiencing a lot of variance in the flow level of the manifolds?

Manifold flow variances of up to 10% are common. On large implements, outer manifolds may
consistently vary by more than 10%.
Verify that primary runs are clear of obstructions.
• Remove manifold caps and run your fan to clear any debris.
• Check for obstructions at the cart's meter roll.
Check for obstructions at the bottom of the bin.
•

What do I do if the mass flow number is abnormal?

If there has been a recent change in rate, fan speed, or product, a different mass flow number is
normal. If there hasn't, try the following steps.
Verify that there is product left in your bins. Flow will be reduced if a bin runs empty.
1.
See if there is product bridging over the metering roll.
2.
Verify that bin lids are securely latched.
3.
Verify that all primary hoses are securely attached.
4.
600820-000012, rev 1.4
Recon Wireless Blockage and Flow Monitor (WBFM) Troubleshooting Guide

Flow

Page 11 of 15