Xdsdfu Screenshot - Texas Instruments XDS110 User Manual

www.ti.com
Installation path:
.../<CCS Install>/ccs_base/common/uscif/xds110
Usage:
xdsdfu <command> <...>
Supported commands:
• -e
Enumerate connected devices, show info, then exit.
• -m
Switch XDS110 into programming mode (DFU mode).
• -b <FILE>
Download the given bootloader file into the device.
• -f <FILE>
Download the given firmware file into the device.
• -s <TEXT>
Set the XDS110 serial number to given text, any eight character string (no spaces). This option
replaces the entire serial number.
• -r
Reset the XDS110 on completion of another command.
• -? or -h
Show help for these and additional commands.
Examples:
How to examine the firmware in all connected XDS110 probes:
xdsdfu -e
xdsdfu examines all connected XDS110 probes and devices in DFU mode, and reports the details of each
device. Sample output is shown in
SPRUI94 – January 2017
Submit Documentation Feedback
Figure 11.
Figure 11. xdsdfu Screenshot
Copyright © 2017, Texas Instruments Incorporated
Functional Description and Operation
XDS110 Debug Probe
19