Cd Playback; Usb Playback - auna Roadie Smart Manual

CD PLAYBACK

On the main MENU, choose the CD mode and press the enter button, then
insert a CD. This appliance reads CD, CD-R / -RW,MP3 discs.
Press  to play the music. Press  to play the next song, press  to return

the last song. Press  to stop the music.
Programmed play mode - In programmed play mode, you can programme
the play order of the tracks on your CD. You can program up to 20 tracks in
total.
Note: To set up programmed play mode, the CD must be stopped in the CD
compartment and must not be paused or playing.
In CD mode, with the CD you wish to programme in the CD compartment
and stopped.
1. Press and release the PROG button to enter CD programmed play mode.
'Prog 1 Track1' will be displayed.
2. Press the / button to go to the track number that you would like to
programme to play first. Press and release the PROG button to confirm.
3. 'PROG2 Track1' will now be displayed and you can select the second
track that you would like to programmed. Continue to select each track
as in Step 2 above, up to a total of 20 tracks. Press and release the PROG
button again to confirm the last track in the programmed play mode list.
4. Press and release the play button to play the programmed tracks.
5. To exit programmed play mode, press and release the stop button twice.
Repeat- press and hold repeat button to choose repeat one, repeat all or
random mode

USB PLAYBACK

On the main MENU, choose the USB mode and press the enter button, and
then insert a
USB flash drive
Press the to play the music. Press to play the next song, press to return the
last song. Press to stop the music.
EN
45