Bt Playback; Sleep Timer Setting - auna Roadie Smart Manual

EN
44

BT PLAYBACK

• Press the MENU button to display the selection menu for the different
operating modes.
• Use the / buttons to select the operating mode BT and press enter
button to confirm.
• Switch on the BT device that you wish to connect the boombox to and
activate the pairing mode here. The device will scan for BT devices in
the reception range.
• When the boombox is found, your BT device shows its name "Roadie
Smart".
• Select the boombox at your BT device.
• Start playback on your BT device.
• Playback now takes place using the radio.
Note: to disconnect the BT connection, please press and hold the pair
button.

SLEEP TIMER SETTING

You can set the timer to make the radio switch to standby after the selected
time in the range of 15 minutes to 180 minutes.
On the main menu, choose Sleep Timer and press enter button. Choose
your desired time period and press the enter button to confirm. You will see
the icon appeared on the top row under the status menu (press right button
under the playing screen to view the status menu).
To see the time remaining for the sleep timer, choose Sleep Timer on the
main menu and press the enter button. It will show the time left to go
standby.