Alphabet Explanation; Operation; Configuration On Pm435; Battery Capacity And Battery Type - Projecta INTELLI-RV PM400 Instruction Manual

5.3.3 Alphabet Explanation

CHARACTER
ALPHABET A B

6. OPERATION

If there is conflict between the configuration on PM400 and the monitor, the monitor will flash as a reminder.

6.1 Configuration on PM435

If there is conflict between the configuration on PM435 and the monitor, the monitor will flash as a reminder.

6.1.1 Battery Capacity and Battery Type

There is a dip switch for you to set battery capacity and battery type.
1 2 3 4
ON
OFF
Figure 33 Dip Switch of PM435
Configure the Max Charging Current of PM435
DS1 DS2 BATTERY CAPACITY
ON ON 100Ah
ON OFF 150Ah
OFF ON 200Ah
OFF OFF 300Ah
Table 17 Battery capacity setting by dip switch
Configure the Battery Type Installed
DS3 DS4 BATTERY TYPE ABSORPTION FLOAT
OFF OFF AGM
OFF ON GEL
ON OFF LFP (LiFePO
ON ON WET
Table 18 Battery type setting by dip switch
C D E F G H
Table 15 Alphabet explanation
Dip switch definitions:
DIP 1
SWITCH
Battery Capacity
Table 16 Dip Switch definition
CHARGING CURRENT OF PM435
10A
15A
20A
30A
14.4V 13.5V
14.1V 13.5V
) 14.4V 13.5V
4
14.7V 13.7V
Figure 34 Reminder when conflict setting between PM435 and Monitor
I J K L M N O P
2 3
Battery Type
Factory default setting
DIP SWITCH
STATUS
When the battery type and
capacity setting on the monitor
is not the same as PM435 dip
switch, the icons are flashing.
Q R S T U V
4
When choosing max charging current,
please take into consideration
the consumption of the DC load
connected with the system.
1 2 3
OFF OFF OFF
Table 19 Factory default setting
Settings of 'Battery Type' and
'Battery Capacity' need to be the
same at both the PM435 dip switch
and the monitor.
X Y
4
OFF
19