videotronic IX-1000AL/IP Mounting And Operating Instructions page 12

SYNC
A synchronization with Linelock is possible with the L Version (only 24 V AC) and H
Version. With 12VDC the camera is firmly set on internal synchronization. You can
adjust the phase in the submenu.
MOTION DET
This camera has a feature that allows you to observe movements of objects in four
different areas on the screen, and the words „MOTION DETECTED" appear on the
screen when movement is detected; hence a singel individual can conduct
supervision effeciently. The camera detects an object's movement by sensing
disparity of outline, and level of brightness and colour.
The detection zone configuration is done in the submenu. First you have to select the
area under „AREA SEL" and then enable the zone under „AREA STATE". The size
and the location of the zones is adjusted under „TOP, BOTTOM, LEFT, RIGHT.
Note:
There is no Motion Detection output signal, it only dispalys words „MOTION DETECTED"
on the screen
PRIVACY
This camera has four privacy zones. The privacy zone configuration is done in the
submenu. First you have to select the area under „AREA SEL" and then enable the
zone under „AREA STATE". The size and the location of the zones are adjusted
under „TOP, BOTTOM, LEFT, RIGHT.
MIRROR
„ON" sets a horizontal image inversion, „OFF" cancels the inversion
SHARPNESS
Sharpness of the picture. If the function is enabled you can adjust the sharpness in
the submenu.
RESET
All settings change back to factory settings.
RETURN
Back to main menu
-12-