Table of Contents
Advertisement
SPECIAL
In this menu the special function of the camera will be configured and set to the
CAMERA ID
If you change the setting to „ON" names etc. can be displayed in the video picture.
The name setup has to be done in the submenu. You can enter up to 15 characters.If
you press „MENU" once more the submenu will be opened. You can make your
choice with the „UP ¿", „DOWN À", „LEFT ½" and „RIGHT ¾" keys and with "MENU"
your choice will be confirmed. You can change the position of the selected name in
the video picture. Move the cursor to "POS" and press "MENU" key. Select the
position by using the „UP ¿", „DOWN À", „LEFT ½" und „RIGHT ¾" keys. Then
press the "MENU" key to confirm the position.
When completed, move the cursor to „END" and press „MENU" key.
COLOR
In the colour menu the settings define the image under low light condition. The
settings are: On, Auto.
On:
The picture is always in colour without sensitivity to IR light.
AUTO:
Under low light the IR cut filter is switched out (only IX 3000A L/H), the picture is
switched to b/w mode, IR light is possible (only IX 3000A L/H).
Note: If AGC is disabled, the colour function is not available.
conditions on site. For some settings the values
will be set in a submenu. The arrow
settings in case of a submenu. To get into the
submenu press the „MENU" key.
-11-
marks the
Advertisement
Table of Contents
