Yamaha MOTIF XS6 Owner's Manual page 107

to 0, and if the resultant Control Depth value is greater than
127 it will be set to 127.
Settings: 0 – 127
5 LFO Phase Offset
Determines the offset values of the Phase parameter in the
[SF1] Wave display for the respective Elements.
Settings: 0°, 90°, 120°, 180°, 240°, 270°
0° 90° 180°
Phase
120°
Making your own LFO—[SF3] User
(Common LFO User)
From this display you can create your own original LFO
wave. You can create a custom LFO wave consisting of up
to sixteen steps. The created LFO wave becomes available
when the Wave parameter in the Common LFO Wave
display is set to "user."
1
2
3
4
1 Template
You can select a pre-programmed template for the LFO
wave.
Settings: all -64, all 0, all +63, saw up, saw down, even step, odd step
all -64
Values of all the steps are set to -64.
all 0
Values of all the steps are set to 0.
all +63
Values of all the steps are set to +63.
saw up
Creates a saw shaped upward wave.
saw down
Creates a saw shaped downward wave.
even step
Values of all odd steps are set to +63, and values of all even steps are
set to -64.
odd step
Values of all even steps are set to +63, and values of all odd steps are
set to -64.
n You can call up the list by pressing the [SF6] LIST button then
select the desired one from the list. For details, see page 82.
Time
270°
240°
n You can use the [SF5] Random button to call up the base
wave at random. Each time you press the [SF5] Random
button, a different LFO wave appears on the display randomly.
2 Slope
Determines the slope or ramp characteristics of the LFO
wave.
Settings: off, up, down, up&down
off
Creates no slope.
up
Creates an upward slope.
down
Creates a downward slope.
up&down
Creates an upward then downward slope.
3 Cycle
Determines the amount of steps for creating the wave.
Settings: 2, 3, 4, 6, 8, 12, 16
4 Level 1 – 16
Determines the level for each step.
Settings: -64 – +63
Effect settings—[F6] Effect
Determines the Effect connection and values of other
parameters for the selected Voice. For details about the
structure in the Voice mode, see page 69.
Effect Connection Settings—[SF1]
Connect
This display gives you at-a-glance, overall view of the
effect routing and comprehensive control over the effects.
1
2
5
7
9
6
8
n Depending on the selected parameter, the LIST icon is shown
at the tab menu corresponding to the [SF6] button. In this
condition, you can call up the list by pressing the [SF6] LIST
button, then select the desired item from the list. For details,
see page 82.
Editing a Normal Voice
3
4
#
!
) @
MOTIF XS Owner's Manual
107