Breakout Box And Optical Fiber Maintenance; Conversion Box - Huawei NE40E Hardware Description

NE40E
Hardware Description

1.13.3 Breakout Box and Optical Fiber Maintenance

This section describes how to maintain the breakout box and optical fibers.
The maintenance method of the MPO and LC optical fibers applies to the mapping optical
fibers.
The maintenance method of the optical modules on the MPO and LC interfaces applies to
adapters on the breakout box.

1.14 Conversion Box

1.14.1 Conversion Box
Figure 1-153 shows the appearance of the 24-port E1/T1 DB100 to RJ48 port conversion box.
Figure 1-153 Appearance of the 24-port E1/T1 DB100 to RJ48 port conversion box
Figure 1-154 shows the appearance of the 48-port E1/T1 DB100 to RJ48 port conversion box.
Figure 1-154 Appearance of the 48-port E1/T1 DB100 to RJ48 port conversion box
Figure 1-155 shows the appearance of the 24-port E1/T1 DB100 to SMB port conversion box.
Figure 1-155 Appearance of the 24-port E1/T1 DB100 to SMB port conversion box
The CR53CFE1 provides 24 E1/T1 interfaces. The connectors on the CR53CFE1 are of the
DB100 type, which cannot be directly used. Therefore, you need to use 100-ohm 24xE1 trunk
cables to connect the 24 E1 port conversion box and the CR53CFE1. In this manner, the
conversion box provides RJ48 interfaces and SMB interfaces that can be directly used. The
Issue 01 (2018-05-03)
Characters in the brackets indicate the BOM number and official name that are separated using a slash
("/") in the [BOM number/Official name] format.
1 Hardware Description
1043