Huawei NE40E Hardware Description page 1037

NE40E
Hardware Description
Table 1-1794 Description of STAT indicator states
State
On (green)
On (red)
Blinking green once every second
Blinking red every second
Off
The AE 905S module meets industrial-grade requirements. Table 1-1795 lists its interface
specifications.
Table 1-1795 AE 905S module interface specifications
Item
BOM Number
Board Name for Order
Interface type
Encapsulation type
Input signal
Output signal
Installation
To meet heat dissipation requirements, leave interfaces around the AE 905S module empty. A
maximum of two AE 905Smodules can be installed on a device.
Figure 1-137 illustrates connections between the AE 905S module, surge protector, and
antenna.
Issue 01 (2018-05-03)
Description
The AE 905S module is operating properly.
The AE 905S module has experienced a hardware
fault or is overheated.
No connection has been established on the GE
interface.
The GPS frequency or time is out of lock.
The AE 905S module is powered off or not
operating.
Specification
03031TUX
ANPM000GPS01
SMA
SFP
An AE 905S module uses the SMA interface to
receive GPS satellite signals.
An AE 905S module uses the GE interface to
provide synchronous Ethernet and 1588v2 for
NE40E.
1 Hardware Description
1023