Download Print this page

Software Installation - Yamaha CLP 380 Installation Manual

Accessory cd-rom for windows
Hide thumbs

Advertisement

Software Installation

Uninstall (Removing the installed application)
To remove any installed application software:
Select [START] → [Settings] → [Control Panel] → [Add/
Remove Programs] → [Install/Uninstall], then select the
application to be removed and click [Add/Remove...].
Follow the on-screen instructions to uninstall the
application.
n
The button names or menus may differ depending on the
computer OS.
n
For instructions on uninstalling the USB-MIDI driver, refer to
"How can I remove the driver?" in the "Troubleshooting"
section (page 7).
USB-MIDI Driver
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
To operate the instrument from your computer via USB, you'll
need to install the appropriate driver software.
The USB-MIDI driver is software that transfers MIDI data back and
forth between sequence software and the instrument via a USB cable.
Computer
Sequence
Software
USB cable
Driver
For Windows XP: See the column at right.
For Windows 2000: See page 5.
For Windows Vista: See page 5.
n
See the Yamaha Download page at the following URL for up-to-date
news on USB-MIDI driver:
http://music.yamaha.com/download/
Check the drive name of the CD-ROM drive you will be using
(D:, E:, Q:, etc.) The drive name is displayed beside the CD-
ROM icon in your "My Computer" folder. The root directory
of the CD-ROM drive will be D:\ , E:\ , or Q:\ , respectively.
4
Accessory CD-ROM for Windows Installation Guide
MIDI instrument (Clavinova, etc.)
Installing the driver on Windows XP
1 Start the computer and use the "Administrator" account
to log on to Windows XP.
2 Select [Start] → [Control Panel].
If the control panel appears as "Pick a category", click
"Switch to Classic View" in the upper left of the window.
All control panels and icons will be displayed.
3 Go to [System] → [Hardware] → [Driver Signing
Options] and check the radio button to the left of
"Ignore" and click [OK].
4 Click the [OK] button to close System Properties, and
then click "X" in the upper right of the window to close
the Control Panel.
5 Insert the included CD-ROM into the CD-ROM drive.
The Start window will appear automatically.
6 First, make sure the POWER switch on the instrument is set
to OFF, then use a USB cable to connect the USB connector of
the computer to the USB TO HOST connector of the
instrument. When the instrument is turned on, the computer
automatically displays the "Found New Hardware Wizard."
If the Wizard window is not displayed automatically, refer to
"Troubleshooting."
If the system displays "Found New Hardware" in the lower right
corner, wait until "Found New Hardware Wizard" is displayed. (The
Wizard window may take a while to display on some computers.)
If the Wizard window prompts you to specify whether or not
to connect to Windows Update, select the radio button for
"No, not this time," then click [Next].
7 Check the radio button to the left of "Install the
software automatically (Recommended)." Click [Next].
The system starts the installation.
n
If during the installation the system displays "...has not passed
Windows Logo testing to verify its compatibility with Windows
XP," click [Continue Anyway].
8 When the installation is complete, the system displays
"Completing the Found New Hardware Wizard." Click [Finish].
(The Wizard window may take a while to display on some computers.)
9 Restart the computer.
If the system displays "Found New Hardware" in the lower right
corner, wait until "System Settings Change" is displayed. (The
Wizard window may take a while to display on some computers.)
n
This Wizard window will not appear when using Windows XP
Professional x64 Edition. There is no need to restart the computer.
) When using Windows XP Professional x64 Edition, the
Support Module must be installed.
After installing the USB-MIDI drivers for all the connected
USB devices, select "My Computer" from the Start menu.
Right-click the CD-ROM icon and select "Open" from the pop-
up menu. Select "USBdrvVista_"
"Setup.exe" and launch "Setup.exe." Follow the on-screen
directions.
n
Once the Support Module is installed, this step is not necessary,
even if you've connected a new USB device or updated the USB-
MIDI driver.
The USB-MIDI driver installation is complete.
"XPx64SupportModule"

Advertisement

loading

  Related Manuals for Yamaha CLP 380

This manual is also suitable for:

370Clp-s306peS306peS308peClp-380