Table of Contents
Advertisement
Main connection interface
• Auto (interface that receives data first) (initial setting)
• USB
•
• Ethernet/Wi-Fi
• No main connection I/F
• When using this printer with multiple interfaces, make sure the interface that is always
connected to be set as the main connection.
• When using multiple interfaces, set the receive buffer capacity to 4 KB.
• You cannot use wired LAN and wireless LAN at the same time.
• When you do not use the
"High" to prevent unauthorized access to the printer over
level by using Epson TM Utility, TM-m30II Utility, or in the Interface Setup mode.
• The displayed items vary depending on the interface configuration.
• For information about the function, see "Printing Using Multiple Interfaces" on page
Autocutting after closing cover
• Cuts (initial setting)
• Does not cut
Paper reduction
Extra upper space reduction
• Disabled (initial setting)
• Enabled
Extra lower space reduction
• Disabled (initial setting)
• Enabled
Line space reduction rate
• Not reduced (initial setting)
• 25%
• 50%
• 75%
Line feed reduction rate
• Not reduced (initial setting)
• 25%
• 50%
• 75%
function, set the
security level to "Middle" or
Chapter 3 Advanced Usage
. You can change the security
27.
53
Advertisement
Table of Contents
