F4. Other Functions; F5. Metronome Volume - Yamaha ARIUS YDP-181 Owner's Manual

F4. Other Functions

This section provides a variety of other functions,
including letting you assign the operation of the
left pedal to one of several modes, and allowing
you to select specific song channels for playback.
1. Engage the Function mode and select
2. Press the [+/YES] button to engage the other
functions' sub-mode, then use the [TEMPO/
FUNCTION ▼, ▲] buttons to select the desired
sub-mode.
Press the [–/NO] or [+/YES] button to select
the desired pedal function or assign the values.
Sub-mode
F4.1 Left Pedal Mode
Setting range:
1. Soft Pedal
The soft pedal reduces the volume and slightly
changes the timbre of notes played while the pedal is
pressed. The soft pedal will not affect notes that are
already playing.
2. Song Play/Pause
This mode allows you to start or pause song playback.
In this mode, the Left Pedal functions in the same
manner as the SONG [PLAY/PAUSE]
panel.
Normal setting: 1 (Soft Pedal)
F4.2 Soft Pedal Effect Depth
Setting range: 1 – 5
Normal setting: 3
This function sets the depth of the soft pedal effect.
F4.3 Song Channel Selection
Setting range:
ALL, 1&2
Normal setting: ALL
The setting here only affects Disklavier Piano Soft songs,
and non-protected External songs. You can specify which
song channels will play back on this instrument. When
"ALL" is selected, channels 1 – 16 will be played back.
When "1&2" is selected, only channels 1 and 2 will be
played back, while channels 3 – 16 will be transmitted via
MIDI.

F5. Metronome Volume

You can change the volume of the metronome
sound.
Use this function to adjust the metronome vol-
ume.
1. Engage the Function mode and select
2. Use the [–/NO] and [+/YES] buttons to set the
metronome volume as required.
Setting range:
Normal setting: 10
SHORTCUT:
You can jump directly to the metronome functions
the [TEMPO/ FUNCTION] button while holding the METRONOME
[ON/OFF] button.
To exit the Function mode, you still need to press the [TEMPO/
FUNCTION] button so that the TEMPO indicator lights up.
button on the
Detailed Settings – [FUNCTION]
1 – 20
NOTE
by pressing
Owner's Manual
.
47