Message List - Yamaha ARIUS YDP-181 Owner's Manual

Message List

Message
CLr Displayed after factory presets are recalled.
Notice
Do not turn off the power of the instrument when "CLr" appears in the display. Doing so may delete all song
data in the instrument, including external songs (page 41).
con Displayed when Musicsoft Downloader is started on a computer connected to the instrument.
When this message appears, you cannot operate the instrument.
E01 Indicates failure in accessing the USB storage device because the device or media is damaged, or because
the USB storage device is not recognized by the instrument.
E02 Displayed when the song data is damaged or not recognized.
E04 Indicates that the song data is too large to be loaded.
End Displayed when the current operation is completed.
Err Displayed when the MIDI/USB cable is disconnected while starting Musicsoft Downloader on a computer con-
nected to the instrument.
FCL Indicates that internal memory has been cleaned up. Recorded songs, panel settings and external songs
which have been loaded from a computer are cleared, because the power has been turned off before the song
save or load operations were completed.
Notice
Do not turn off the power of the instrument when "FCL" appears in the display.
For Indicates that the instrument has engaged format mode for the USB storage device.
FUL Displayed when internal memory becomes full during song recording.
Displayed when the USB storage device becomes full and the song cannot be saved.
Displayed when the total amount of files has become too large.
Lod Displayed when a protected song is loading.
n y Confirms whether each operation is executed or not.
– Reconfirms whether the overwriting, delete or format operation is executed or not.
n y
Pro Indicates that the USB storage device or media is protected.
UnF Indicates the inserted USB storage device has not been formatted.
Comment
Message List
55
Owner's Manual