Table of Contents
Advertisement
Additional playback features
Camera angle
If the disc contains sequences recorded from different camera angles, the angle box
appears, showing the number of available angles, and the angle being shown. You can
then change the camera angle if you wish.
1
Press ANGLE.
2
Use w or v to select the required angle in the angle box.
3
To go to any angle directly, enter the angle number using the numerical keys 0..9.
After a small delay, play changes to the selected angle. The angle box remains dis-
played until multiple angles are no longer available.
You can also use this function through an on-screen menu (a system menu bar).
Zoom feature
The Zoom function allows you to enlarge the video image and to pan through the
enlarged image.
1
Press Zoom.
2
Press w or v to activate the Zoom function and select the required zoom factor;
1.33 or 2 or 4.
The recorder will go into pause mode.
The selected zoom factor appears below the Zoom icon in the system menu bar
and "Press OK to pan" appears below the system menu bar.
The picture will change accordingly.
3
Press ENTER/OK to confirm the selection.
The panning icons appear on the screen.
4
Use v, w, u, t to pan all over the screen.
5
When ENTER/OK is pressed only the zoomed picture will be shown on the
screen.
6
Press
to exit zoom mode.
You can access to Zoom function by an on-screen menu (a system menu bar).
Tip
Tip
38
Advertisement
Table of Contents
