Manually Setting The Time & Date - Yamaha DRX-2 Owner's Manual

Time/date
Manual
Time
AM/PM
Year
Month
Date
Daylight Saving
To exit press
SYSTEM MENU
27
Manually setting the time & date
If the time is incorrect, this could be due to a weak or disrupted TV signal. If this is the
case, switch off the automatic function.
1
Press SYSTEM-MENU on the remote control. The menu bar will appear.
2
Select "
3
Select line "Installation" using w or v and confirm with u.
4
Select line "Time/date" using w or v and confirm with u.
5
Select "Manual" with w or v.
6
Confirm with ENTER/OK.
7
Change the time in line "Time" using the number buttons 0..9 on your remote
control.
8
Check "AM/PM", "Year", "Month", and "Date" in the same way.
To select between the fields, use w or v.
Change the information with t, u or the number buttons 0..9.
09:02
9
AM
Select one of the following settings in line "Daylight Saving":
01
"On": The time set corresponds to the summer time (summer time is on)
01
"Off": The time set corresponds to the winter time (summer time is off)
01
Off
0
When all settings are correct, confirm with ENTER/OK.
A
To end, press SYSTEM-MENU.
If the setting has been confirmed with OK the automatic system is disabled.
" using t or u.
Installing your DVD recorder