Setting The Auto-Standby Mode - Yamaha E810 Owner's Manual

You can turn on/off the auto-standby feature which automatically set the system to the standby mode if you do not
operate the system for 30 minutes while the receiver is set to the DVD/CD input mode. (The default setting is "AUTO
STANDBY ON".)
Notes
• Unless you connect the receiver and the DVD player properly with the supplied system control cable (see page 12), this feature does
not function for the system.
• This feature does not function for the system during playback.
NATURAL SOUND STEREO RECEIVER RX-E810
DISPLAY MEMORY AUTO/MAN'L
TIMER
TIME ADJ TIMER
BASS TREBLE
STANDBY/ON
PHONES
MEMORY
1
Rotate INPUT on the front panel of the
receiver to select "DVD/CD" as an input
source.
2
Press MEMORY.
The current setting appears in the receiver's front
panel display for about five seconds.
3
While the current setting is displayed in the
front panel display, press u or d to switch
between "AUTO STANDBY ON" or "AUTO
STANDBY OFF".
4
Press MEMORY or wait for five seconds
without any operation to confirm the setting.

Setting the auto-standby mode

u / d
PURE DIRECT
PRESET/BAND PRESET/TUNING
VOLUME
HOUR MIN
INPUT
BALANCE
L R
MIN MAX
INPUT
45
En