Advertisement
Available languages
Available languages
Instructions for use
By pressing the button shown in the figure 1,
you will be able to control the functions of the
extractor.
To achieve better extraction, we recommend
switching on the extractor a few minutes before
starting to cook (3 - 5 minutes) so that the air
flow is continuous and stable when extracting
the fumes.
Likewise, keep the extractor switched on for a
few minutes when cooking is complete to allow
all fumes and odours to be expelled.
88
1- Display
2- Timer
3- Light
4- Reduce fan speed
5- Increase fan speed
Program the working time
1) Switch on the cooker hood and choose the
required aspiration speed.
2) Push 'Timer' .
3) Select the required programming time from
1 to 99 minutes by using the buttons '+' and '-' .
4) The display will show the remaining
programming time.The maximum speed 'H' can
only be selected manually and will be changed
automatically to the second speed level after 7
minutes.
Filter saturation indicator "F"
•When the sign 'Saturation of the filters' is on, the
filters should be cleaned.
•After cleaning the filters, simultaneously push
"Timer" and "Light" keys for at least 3 seconds
whereupon the sign will be switched off.
Fresh Function
•The fresh function consists on activating the
motor at speed 1 for ten minutos each hour. This
function will stay active for 24h or until it is manu-
ally turned off.
•To activate/ deactivate this function, simultane-
ously push "-" and "+" keys.
Lights
For changing the light bulbs please contact the
manufacturer's nearest Technical Service.
Lamp code:
89220139
Cleaning and maintenance
During cleaning and maintenance work, make
sure the safety instructions are complied with.
Cleaning the hood body
•If your kitchen hood is made of stainless steel,
use proprietary cleaners mentioned in the product
instructions.
•If your kitchen hood is painted, use lukewarm water
and a neutral soap.
•Never use metallic scourers, nor abrasive or
corrosive products.
•Dry the kitchen hood using a cloth that does not
produce fibres.
•Do not use vapour cleaners
Cleaning the metal filter
•To remove the filters from their fittings, press lightly
on the locks and then pull them off.
•The metal filters can be cleaned by soaking them
in hot water with neutral detergent until the fat
dissolves and then rinsing them under the tap or
using special anti-grease products. They can also be
washed in a dishwasher. In this case, it is advisable
to stack them vertically to avoid food residues to
stick to them.
•Cleaning in a dishwasher may damage the metallic
Advertisement
