Aspire Spryte User Manual page 48

Using the Device
Switching the Atomizer Head
1. Remove the pod and hold it so that the mouthpiece faces the floor.
2. Unscrew the centrally located chimney unit from the connected atomizer head by turning anticlockwise.
3. Remove the atomizer head from the airflow control and replace with a new one. Drip a few drops of e-liquid directly into
the coil of the new atomizer head and leave enough time to make sure it is fully saturated before first use.
4. Reconnect all parts.
5. Place the pod back on the battery unit. Once
you hear a soft click, both parts are correctly
connected.
Please also note the operating
instructions on page 42.
46