Advertisement
Quick Links
Nautilus
Thank you for your purchase of the Aspire Nautilus tank system.
Before using the Nautilus, please read through the manual for proper
care and use. This will insure continued enjoyment of your Nautilus Tank.
Please keep manual for future reference.
The Nautilus is the next generation of tank systems. Made of stainless
steel and Pyrex glass, the Nautilus also uses the Aspire "BDC" (Bottom
Dual Coil) atomizer technology.
The Nautilus has an exclusive adjustable airflow design that is
revolutionarily. With a simple turn of the lower ring, you have four
options to adjust airflow to meet people's different requirements for
vaping. With the option of different size air-ports, it allows the user to
produce big clouds of vapor, with a pure and clean taste. With the unique
Nautilus four-port system, you can now adjust how hard or soft the draw
is, how warm or cold the vapor is, and how much vapor is produced. The
Nautilus is also very easy to install and refill.
Aspire...the trusted name in Personal Vaporizers.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Aspire Nautilus
Summary of Contents for Aspire Nautilus
- Page 1 With the unique Nautilus four-port system, you can now adjust how hard or soft the draw is, how warm or cold the vapor is, and how much vapor is produced. The Nautilus is also very easy to install and refill.
- Page 2 Configuration Contents of kit: * Complete Nautilus Tank (1.6 ohm atomizer pre-installed) * 1 replacement atomizer (1.8 ohm) * 1 eGo threaded cone * 1 user manual...
- Page 3 Nautilus Exploded View Drip tip Upper hardware PYREX Glass tank Replaceable Atomizer (Aspire BDC) Airflow adjustment ring Bottom hardware...
- Page 4 How to assembly 1. Screw the upper hardware to the Pyrex tank (DO NOT over tighten!). 2. Screw the BDC Atomizer into the bottom hardware (make sure the BDC atomizer is snugged down hand tight).
- Page 5 How to assembly 3. Snugly screw the Tank hardware to the bottom Atomizer hardware (the atomizer screws onto the air-tube shaft in center). 4. Insert the drip-tip into the upper hardware.
- Page 6 How to fill liquid 1. Check to make sure the upper stainless steel be screwed tightly onto the glass tank. 2. Screw the bottom hardware off the upper hardware.
- Page 7 How to fill liquid When you screw off the bottom hardware, the atomizer should be screwed off the upper hardware at the same time, in case the atomizer is still kept onto the air-tube shaft in center, please screw the atomizer off and screw back onto the bottom hardware in order to avoid disconnecting.
- Page 8 How to fill liquid 3. Fill liquid into the space between the glass tank and the center metal tube. DO NOT over fill or get liquid into the center shaft. 4. Screw the bottom hardware back onto the upper hardware.
- Page 9 How to fill liquid A: Don’t fill the liquid into the central hole. B: Let the Nautilus stand for 2 minutes before use—this will let e-liquid absorbed into the wick/atomizer chamber. C: For use with eGo batteries: screw the supplied cone onto the threads, and then install the Nautilus onto the battery.
- Page 10 User Manual FOR PATENT PENDING DESIGNED AND MANUFACTURED BY EIGATE TECHNOLOGY Copyright All right reserved...
- Page 11 How to adjust airflow Airflow hole size: Ø0.9mm Ø1.1mm Ø1.4mm Ø1.8mm The Nautilus unique airflow valve features 4 different sizes to control the airflow to the amount you prefer. Rotate the Airflow control valve to the most comfortable one for you.
- Page 12 2. When disassembling, please remove the bottom hardware first, and then screw off the glass tank. 3. Do not fill the Aspire Nautilus over 5ml; when the liquid level is below 0.5ml, should be refilled to avoid a dry wick.
Need help?
Do you have a question about the Nautilus and is the answer not in the manual?
Questions and answers