Video Connections; Connecting To An Amplifier Equipped With An Rca Type Video Signal Input Terminal (Including An S-Video Input Terminal) - Yamaha DVD-C900 Owner's Manual

Natural sound dvd player
Hide thumbs Also See for DVD-C900:
Table of Contents

Advertisement

Connections

Video connections

Connecting to an amplifier equipped with an RCA type video signal input
terminal (including an S-video input terminal)
Connect this unit's VIDEO 1 (or 2) terminal to the amplifier's RCA type video signal input terminal (labeled "DVD/LD" etc.).
If your amplifier has an S-video input terminal, you can connect this unit's S VIDEO terminal to the amplifier's S-video input terminal
by using a commercially available S-connector cable.
When the connection is made in one of these ways, be sure to set the VIDEO OUT SELECT switch to the "VIDEO/S VIDEO"
side.
This unit has two VIDEO terminals. The other terminal can be connected to another amplifier or TV.
Refer to pages 10-13
for AUDIO OUT
terminal connections.
Notes
● If your TV has an RCA type video signal input terminal
(including an S-video input terminal), this unit can be
connected to the TV directly.
● Do not connect this unit to the TV through a video cassette
recorder. Otherwise, the picture may not be played back
normally with some DVDs. This is because the copyright
protection circuit built-in this unit operates.
Be sure to change the setting of the VIDEO OUT
SELECT switch only when this unit is turned off or the
power cord of this unit is disconnected from the AC
outlet.
14
VIDEO OUT SELECT
VIDEO/
COMPONENT
S VIDEO
VIDEO OUT
DIGITAL
VIDEO OUT SELECT
PCM/
DIGITAL
MPEG/DTS
VIDEO/
COMPONENT
S VIDEO
VIDEO OUT
COAXIAL
OPTICAL
MIXED 2CH
VIDEO
1
AUDIO OUT
2
1
TV monitor
Refer to pages 10-13
for AUDIO OUT
terminal connections.
Connection cord (included)
S-video cable (not included)
S VIDEO
COMPONENT VIDEO
Y
P
P
B
R
VIDEO OUT
This unit (U.S.A. model)
Connection cord
(not included)
S VIDEO terminal
This unit provides you with a S VIDEO terminal in addition to
standard type VIDEO terminals.
The S VIDEO terminal transmits video signals separated into
luminance (Y) signals and color (C) signals. High quality
pictures are obtained from this terminal. In comparison with
the S VIDEO terminal, standard type VIDEO terminals
transmit "composite" video signals.
VIDEO IN
S-VIDEO IN
or
VIDEO
MONITOR
OUT
VIDEO IN
TV monitor
VIDEO IN
S VIDEO
MONITOR
OUT
Amplifier
S VIDEO IN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents