Beginning Playback From A Preferred Time Point; On The Disc - Yamaha DVD-C900 Owner's Manual

DISC SKIP DISC MODE TIME
CANCEL S/F REPEAT A-B RANDOM
1 2 3
6 7 8
+1 0
ANGLE RETURN TITLE/INDEX
SELECT
TITLE
MENU MULTI SPEED
SET UP
SKIP/SEARCH
STOP STILL/PAUSE
ON SCREEN
CD / CD
DISC
1 2 3 4 5
OPEN/
CLOSE
PROG
4 5
2
9 0
1
AUDIO
SUBTITLE
OFF/ON
PLAY
3
3
PLAYXCHANGE OPEN/CLOSE
/
SKIP/ SEARCH
3
Beginning playback from a
preferred time point on the title (or
disc)
You can locate a preferred time point on the title (or disc) by
designating the time, and begin playback from the point or
suspend playback at the point.
1
Press TITLE/INDEX once or more to select the time
search mode.
* "TIME _ : _ _ : _ _ " appears on the monitor screen.
* Every time TITLE/INDEX is pressed, the search mode
changes as follows.
Title (index) search
[TITLE _ _ (INDEX _ _ _ )]
The search mode
is turned off.
2
Enter the preferred time with the numeric button(s).
3
Press PLAY to begin playback from the time point.
Press STILL/PAUSE to suspend playback at the
time point.
Notes
•
If the time longer than the total play time of the title (or disc)
is entered, the operation will be canceled.
•
For DVDs only:
* Depending on the disc used, it may not be possible to
perform this search operation.
* Depending on the disc used, playback may not begin from
the specified time point even when the operation have
been performed correctly.
* This search operation may be ineffective when a title is
changing. In this case, press CANCEL and try again.
•
For Video CDs only:
This search operation cannot be made when this unit is in
the Playback Control mode.
How to use the numeric buttons to enter the time
(Example)
•
To enter 45 minutes and 23 seconds
Press "4", "5", "2" and "3" sequentially.
•
To enter 2 hours, 15 minutes and 10 seconds
Press "2", "1", "5", "1" and "0" sequentially.
Basic operation
Time search
[TIME _ : _ _ : _ _ ]
21