Yamaha DIGITAL MIXING STUDIO N12 Owner's Manual page 59

Digital mixing studio
Hide thumbs Also See for DIGITAL MIXING STUDIO N12:
Table of Contents

Advertisement

2TR IN
To C-R OUT, STEREO bus
ST OUT
Outputs CH1–12, 2TR IN, DAW,
REVERB, RETURN signals
C-R OUT
The BASS MANAGEMENT function
works in the surround sound system
(Only n12).
AUX OUT (Only n12)
Outputs CH1-12, DAW, REVERB
Return, TALK BACK signals
PHONES (AUX, C-R)
DAW I/O
MIDI IN/OUT
Output Level Meter
Reverb
To AUX bus, REC bus, STEREO bus
DAW Remote Control
European models
Purchaser/User Information specified in EN55103-1 and EN55103-2.
Inrush Current: 2.5 A (n12), 2 A (n8)
Conforms to Environments: E1, E2, E3, E4
Europäische Modelle
Käufer/Anwenderinformationen nach EN55103-1 und EN55103-2.
Einschaltstrom: 2.5 A (n12), 2 A (n8)
Einsatzbereiche: E1, E2, E3 und E4
Pour les modèles européens
Les informations acheteur/utilisateur sont spécifiées par les directives EN55103-1 et EN55103-2.
Courant d'appel : 2.5 A (n12), 2 A (n8)
Conformité aux normes environnementales : E1, E2, E3 et E4
Modelos europeos
Información comprador/usuario especificada en EN55103-1 y EN55103-2.
Intensidad de entrada: 2.5 A (n12), 2 A (n8)
Conforme para entornos: E1, E2, E3, E4
LEVEL Control
ON Switch
AD Converter
STEREO Fader
STEREO ON Switch
STEREO BAL Control
DA Converter
CONTROL ROOM LEVEL Control
C-R SPEAKER SELECT Switch
C-R SOURCE SELECT Switch
DOWN MIX Switch
DIMMER Switch
MUTE Switch
TALKBACK Switch
TALK BACK LEVEL Control
PFL Switch
DA Converter
AUX LEVEL Control
DA Converter
Maximum Output Level
Audio I/F
MIDI I/F
MASTER LEVEL METER
METER SELECT Switch
Type
Control
WORK MODE
MONITOR REMOTE
CLICK REMOTE
TRACK CONTROL
TRANSPORT
–∞ to +6 dB (to STEREO bus)/0 dB (to C-R)
ON/OFF
24 bit linear, Enhanced dual-bit delta/sigma conversion
n12
–∞ to +10 dB
n8
–∞ to +6 dB
ON/OFF
33 resolution
24 bit linear, 128 times oversampling advanced multi-bit delta/sigma
conversion
–∞ to 0 dB
n12
A (L/R), B (C/SW), C (LS/RS) Brackets ( ) indicate sources when 5.1
is selected as C-R SOURCE SELECT.
n12
5.1/DAW/STEREO bus/AUX bus/2TR IN
n8
DAW/STEREO bus/AUX bus/2TR IN
n12
ON/OFF (Active when 5.1 is selected as C-R SOURCE SELECT)
ON/OFF
ON/OFF
n12
ON/OFF
n12
–∞ to +6 dB, Sensitivity: –40 dB
ON (SOLO: Pre-fader)/OFF (SOLO: Post-fader)
24 bit linear, 128 times oversampling Advanced multi-bit delta/sigma
conversion
–∞ to +6 dB (to AUX bus), –∞ to +6 dB (AUX bus to AUX OUT)
24 bit linear, 128 times oversampling (@ fs = 44.1 kHz, 48 kHz), 64
times oversampling (@ fs = 88.2 kHz, 96 kHz) advanced multi-bit
delta-sigma conversion
LEVEL control for each AUX and C-R jacks
25 mW (@ 8 Ω)/75 mW (@ 40 Ω)
n12
16-ch input/16-ch output
n8
12-ch input/12-ch output
2-port input/2-port output
(DAW remote control, Input/Output via MIDI IN/OUT jacks)
1 port input/1port output
12 points LED meter × 6
n12
12 points LED meter × 2
n8
C-R level/Bus level
HALL/ROOM/PLATE
REVERB TIME, LEVEL
ST MIX/HARDWARE MIX/5.1 MIX (5.1 MIX is only for n12.)
Recording monitor: ON/OFF, VST effects (WET): ON/OFF
Click ON/OFF, CLICK LEVEL control
PREV, NEXT, REC READY switch
CYCLE, Previous Marker, Add Marker, Next Marker, REW, FWD,
STOP, PLAY, REC switch
Appendix
59
Owner's Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

N8

Table of Contents