Advertisement
Step 3. Insert the Firmware Update CD (Audio CD) into the CD/DVD Player and close the tray. If the disc
begins to play, press the STOP botton on the CD/DVD Player.
3a)
If a DVD Player is being used to perform this update, make sure that the DVD Player is set
to PCM Digital Bitstream. See the DVD Player Owner's Manual for instructions on how to
configure the PCM Digital Bitstream. Once update is complete, restore DVD Player to its
original settings.
Step 4. Unplug the AC power cable
from the back of the Yamaha receiver,
as shown in FIG 2.0.
Step 5. On the front panel of the Yamaha receiver,
push the MASTER button to the "ON" position, as
shown in FIG 3.0. You can find operational details in
the owner's manual.
Step 6. Press and hold the MAIN ZONE ON/OFF button and keep it pressed, as shown in FIG 4.0
while you plug the AC power cord back into the Yamaha receiver, as shown in FIG 4.1. Once the
front panel displays
MAIN ZONE
ON/OFF
ON
OFF
MASTER
ON
OFF
MASTER
"CDDA
UPGRADER" you can let go of the MAIN ZONE ON/OFF button.
AUDIO
SELECT
INPUT
PR
Fig 4.0
AC IN
AC OUTLETS
Fig 2.0
AUDIO
SELECT
INPUT
MAIN ZONE
ON/OFF
ON
OFF
MASTER
Fig 3.0
AC IN
AC OUTLETS
Fig 4.1
To the AC wall outlet
TONE
A/B/C/D/E
CONTROL
PRESET/TUN
CATEGORY
STRAIGHT
EFFECT
YPAO
SILENT CINEMA
PROGRAM
OPTIMIZER
MIC
PHONES
To the AC wall outlet
Advertisement
