Appendix; Writing Modes - Yamaha CRW8824SX Series Owner's Manual

Appendix

Writing Modes

Disc-at-Once (DAO)
This mode is used when writing a complete disc in a single pass without pausing.
Data cannot be added later, even if the full capacity of the blank disc has not been
used.
Example: General CD-ROM
0
Lead-in
Example: Audio CD
0
Audio Audio
Track 1 Track 2 Track 3
Lead-in
n The lead-in and lead-out areas signify the beginning and end points of a session. They
are not part of the data but contain information about the session itself. Basically, a
session consists of a lead-in, data, and a lead-out.
Track-at-Once (TAO)
This mode is used when writing data to a disc one track at a time. More tracks
can be added later if there is enough space left on the disc. This is why Track-at-
Once mode is sometimes referred to as Multisession.
0
Data
Track 1
Session 1
Lead-in Lead-out
/Lead-in
n Only the first session of a multisession disc can be played back on a conventional audio
CD player. Single session discs can be played back completely.
Data
Track 1
Session 1
Audio Audio Audio
Track 4 Track 5
Session 1
Data Data
Track 2 Track 3
Session 2 Session 3
Lead-out
/Lead-in
27
Any remaining space
cannot be used
Lead-out
Audio Audio
Track 6 Track 7
Any remaining space
cannot be used
Lead-out
Any remaining space
can be used
Lead-out
650MB
650MB
650MB