Yamaha CD Recordable/Rewritable Drive CRW3200 Owner's Manual page 23

Preparing the CRW3200E Drive
Note
• The function of a plastic shunt is to electrically connect the jumper switch
contacts. Inserting and removing the pin turn the settings on and off.
• Be sure to turn off the computer prior to setting the jumper switch.
Cable Select (CSEL)
If your computer supports a cable select function, insert a plastic shunt into the cable
select (CSEL) jumper switch so that the computer will automatically adjust the
CRW3200E drive setting to master or slave.
If you have any problems with the CRW3200E drive when set to cable select
(CSEL), set the drive to master or slave.
Refer to the documentation that comes with your computer to find out if it supports
cable select (CSEL) function.
15