Rear Panel - Yamaha CD Recordable/Rewritable Drive CRW-F1 Owner's Manual

Names and Functions of Parts

Rear Panel

DIGITAL AUDIO OUT
Connects to the sound card in the computer
using a digital audio cable if the sound card
has an S/PDIF (digital audio) input jack.
(P. 21)
ANALOG AUDIO OUT
Connects to the sound card in the computer
using an audio cable. (P. 20)
3
Jumper switch
Insert a plastic shunt into the switch to set
the connection of the IDE to master or
slave. The switch is set at slave by default.
(P. 15)
IDE INTERFACE CONNECTOR
Connects a 40-pin IDE cable. (P. 18)
DC INPUT
Connects the 4-pin internal power cable of
the computer. (P. 22)