Zeiss Conquest 30 T Instructions For Use Manual page 9

Binoculars Conquest 30 T*/ 40 T* / 45 T* / 50 T* / 56 T*
Note:
Simply thread the carrying strap through the eyelets on the rainguard. Before
mounting the carrying strap as shown in Fig. 3, adjust the length of the strap
as required by loosening or tightening it accordingly using the clip.
The rain guard needs only to be attached on one side; however, it can be
attached to both sides.
Mounting on a tripod
The binoculars of the Conquest series can be mounted on any commercial
camera tripod using the Carl Zeiss universal tripod adapter for binoculars.
Cat. No.: Carl Zeiss tripod 1206-889
Cat. No.: Carl Zeiss tripod adapter for binoculars 52 83 87
Care and maintenance
Carl Zeiss binoculars need no special care or maintenance. Do not wipe off
coarse dirt particles (e.g. sand) from the lenses, but blow them off or remove
them with a soft brush.
Fingerprints on the lens surfaces may affect them in the course of time. The
easiest way to keep the lenses clean is by breathing on them and wiping with
a soft optical cleaning cloth or optical cleaning paper.
Warning
Do not under any circumstances look through the binoculars at the
sun or laser light sources! Serious eye injury may otherwise result.