Table of Contents
Advertisement
Quick Links
Allied Medical Set-Up Guide
1. Required measurements for set up
Letter
Body Part
A
Hip
B
Thigh (Right)
B
Thigh (Left)
C
Right Leg
C
Left Leg
D
Right back height (below scapula)
D
Left back height (below scapula)
E
Shoulder to seat
F
Top of head to seat
G
Right elbow to seat
G
Left elbow to seat
H
Back width (below scapula)
The required measurement is best taken, while the client is in a seated position,
from the base of the seat to the bottom of the scapular or top of the shoulders
to allow for maximum support.
For maximum support, the back height may fall in between these two
measurements. The Icon Mid Back can sometimes be used in place of a
tall back on an individual that has a body configuration preventing the back
support from being mounted in a lower position.
Varilite Icon Mid Back
Tools required:
•
Tape measure
•
1x 4mm Allen key
•
Paper & pen
•
Script or brochure.
•
Instruction manual
Required (Y/N)
N
N
N
N
N
Y
Y
Y
N
N
N
N
Advertisement
Table of Contents
Related Manuals for ALLIED MEDICAL Varilite Icon Mid Back
Summary of Contents for ALLIED MEDICAL Varilite Icon Mid Back
- Page 1 Allied Medical Set-Up Guide Varilite Icon Mid Back Tools required: • Tape measure • 1x 4mm Allen key • Paper & pen • Script or brochure. • Instruction manual 1. Required measurements for set up Letter Body Part Required (Y/N)
- Page 2 2. Available adjustments and options Terminology...
- Page 3 Angle Adjustments Up to 20 degrees posterior or up to 20 degrees anterior. • Adjustments are made by loosening the bolts on the side of the cane bracket that hold the slide bracket housing. • Once loosened you can adjust the back to the desired angle. Depth Adjustments There are plenty of options and configurations to achieve a variety of different seat depths by changing the position of the cane bracket or slide bracket (see image below).
- Page 4 Height Adjustments The seatback can be adjusted up and down on the sliding shell brackets or through the cane brackets. • Cane brackets can be mounted in various positions depending on the canes on the chair, and how much space is available for mounting. After setting these in the appropriate position the back height can then be adjusted further by loosening the screws on the sliding bracket to achieve the desired height.
- Page 5 3. Tips & Tricks Easy Set-up • Mount the brackets first. • When mounting the brackets, ensure that the hardware is mounted parallel to the seat rails. This will make it much easier when you are removing and inserting the seat back. •...
Need help?
Do you have a question about the Varilite Icon Mid Back and is the answer not in the manual?
Questions and answers