Using Your Extractor
For best performance, you should switch on the extractor 15 minutes before starting to cook and leave it to run for
approximately 15 minutes after the end of cooking.
Fig. 1
ON/OFF Key/Delay Timer:
Press the
key to turn on/o the extractor. If the extractor is turned on,
the delay timer can be activated by pressing the
the symbol
flashing for 4 seconds. By pressing the keys
can be adjusted (max. 9 minutes). In order to deactivate the timer delay, press the
key again.
Clock Setting
To set the clock on your extractor, press and hold the
The clock display will flash. Use
after which you can adjust the minutes. Once set, press
Please note, the clock will return to its previous setting if no key is pressed for
5 seconds whilst setting the time.
Adjusting the Fan Speed
Once the extractor is turned on, press the
speed. When pressed again, it will reduce the fan speed from high to medium,
to low and finally o .
Once the extractor is turned on, press the
speed. When pressed again, it will reduce the fan speed from high to medium,
to low and finally o .
Light Key
Press the
key to turn on/o the lights. When the lights are on, the display will
show the symbol .
again. The display will show
or
key for 2 seconds.
or
keys to set the hour, press
key to confirm.
key to set the fan motor to high
key to set the fan motor to high
, the delay timer
key to set
3