Changing the Light
NOTE: Replacement of the LED lights MUST be
carried out by a qualified electrician.
IMPORTANT: DO NOT PERFORM MAINTENANCE
OR CLEANING OF THE EXTRACTOR WITHOUT FIRST
SWITCHING OFF THE ELECTRICITY SUPPLY.
R
emove the lamp using a flat-head screwdriver (Fig. 4-I).
Remove the lamp. Unplug the lamp wire connector. Replace the lamp
(Fig.4-II).
Plug the wire connector into the new lamp.
the lamp holder. Push the LED lamp into position until it clicks into
place (Fig. 4-III).
s are
The light
designed for use during cooking and not for general
room illumination. Extended use of the lights can reduce their life
span. Please contact your local retailer in order to purchase suitable
replacement LED lights.
Please note that the LED lights are NOT covered by the guarantee.
220V 2X1W LED MAX
6
P
lace the new lamp into
Fig. 4-I
Fig. 4-II
Fig. 4-III