Advertisement
26
Combined retractable tie-down and occupant restraints
After care
Equipment storage and maintenance
•
Store the restraint safely off the floor to avoid damage and ensure that
it cannot become a projectile in an accident. This can be achieved by
using wall mounted storage bag such as SLR111.
•
Regularly inspect the wheelchair restraint systems for damage, wear or
malfunction. If any problems are identified replace it immediately.
•
When not in use, keep loose occupant webbing ends connected
to their corresponding buckle sleeves, etc, to prevent them from
becoming tripping hazards and from flailing around when the vehicle
is in motion.
•
All webbing and components can be cleaned as necessary, but care
should be taken to prevent contamination of the webbings with
polishes, oils and chemicals, particularly battery acid.
•
To clean the straps use warm soapy water and a clean soft cloth. Rinse
with clear water and allow to air dry. To disinfect, use a mild spray
disinfectant and do not use products containing bleach. Important:
when cleaning or disinfecting, do not immerse or flood buckles,
karabiners fittings or floor anchors in the disinfectant or water.
•
If the vehicle is involved in an accident when any restraints are
deployed, remove them from service and replace immediately. If in
doubt please contact BraunAbility.
Warranty
BraunAbility products are
extensively tested using
BraunAbility anchorage systems,
and our full warranty normally only
applies to BraunAbility equipment
when used with BraunAbility
branded anchorages or as
instructed. BraunAbility have also
participated in test programs with
other manufacturers anchorage
products and will support warranty
on the BraunAbility products when
used in conjunction with such
jointly tested systems. For further
details on specific applications
please contact the Sales Office. In
other situations, using BraunAbility
products, for which BraunAbility
has not participated in a joint test
program, a limited BraunAbility
warranty will apply.
Advertisement
