Configuring Level Measurement Via Operating Software; Via Smartblue - Endress+Hauser Micropilot FMR20 Operating Instructions Manual

Micropilot FMR20 MODBUS RS485
Endress+Hauser
1
 23 Envelope curve display (sample) in SmartBlue for iOS
1 Record video
2 Create screenshot
3 Display mapping menu
4 Start/stop video recording
5 Move time on time axis
9.3 Configuring level measurement via operating
software
 24 Configuration parameters for level measurement in liquids
R Reference point of measurement
D Distance
L Level
E Empty calibration (= zero point)
F Full calibration (= span)
BD Blocking distance
9.3.1

Via SmartBlue

1. Navigate to: Setup → Distance unit
 Select unit of length for distance calculation
2. Navigate to: Setup → Empty calibration
 Specify empty distance E (distance from reference point R to minimum level)
3. Navigate to: Setup → Full calibration
 Specify full distance F (span: max. level - min. level)
R
BD
D
E
F
L
Commissioning and operation
2
3
4
5
100%
0%
A0029487
A0028417
29