Xerox Phaser 860 User Manual page 34

Xerox phaser 860 color printer user guide

Hide thumbs Also See for Phaser 860:

Table of Contents

Slide the ream of paper into the tray so that the paper rests up

against the angled paper stop at the rear of the tray. The stack of

paper should assume the same angle as the paper stop.

Note

Don't load paper above the fill line on the left side of the tray.

Note

If you are loading letterhead and printing on one side of the

paper, place the paper face up with the letterhead toward the

front of the tray. For two-sided jobs, place the letterhead

paper face down with the letterhead toward the back of the

tray.

Remove any sheets that are damaged.

0726-77

Phaser 860 Color Printer

0726-10

Table of Contents

Tektronix phaser 860