Sony Ericsson Z200 White Paper page 38

Feature
Support of the QoS modifi-
cation procedure
Interfaces to external
devices supported by the
phone
Downlink data rate
Uplink data rate
Mode of operation
R Reference point
IP connectivity
Application
QoS
PDP context
SIM
Cell broadcast service
Feature
User notification of the reception of a CB message
Handling of reception of several unread messages
Support of all CBMI from 0 to 65534
File support
Support CB SIM data download
Support of all applicable Data Coding Scheme values
as defined in 3G TS 23.038 V3.3.0
Support in the Z200/Z208
Yes, when initiated by the network
(not by the handset)
IrDA, Datarate = SIR & MIR, max
115.2 kbps
Up to 85,600 bps for packet data communication, using 4 time slots in cod-
ing scheme CS-4
Up to 21,400 bps for packet data communication, using 1 time slot in coding
scheme CS-4
Class B and Class C modes of operation supported. It is possible for the
user to choose if the Circuit Switched services should be favoured.
Physical layer: PPP is supported as L2 layer in the R reference point
Authentication algorithms PAP, CHAP supported
PDP type IP is supported
IP termination in mobile
WAP over GPRS supported (UDP/IP and GPRS-SMS)
SMS over GPRS (SMS-MT, SMS-MO) supported
QoS negotiation supported. Default requested QoS sent by the handset at
PDP context activation is reliability Class 3. Peak/Mean/Delay/Precedence
Class: subscribed.
Precedence class supported (1,2,3)
Reliability class 1-5 supported
Delay classes supported (1,2,3,4)
Mean and peak throughput rate limited by multi slot class 4 and CS-4
10 PDP context descriptions stored in mobile
PDP context description is edited via application in mobile or via OTA
Simultaneous PDP contexts not supported
Network requested PDP context not supported
GPRS aware, as well as non GPRS aware SIMs are supported
38
White Paper
Support in the Z200/Z208
Message displayed on screen
The last message overwrites the previous one
Yes
CBMI
Yes
Yes
Z200/Z208
February 2004