Advertisement
Step 5: Apply the sticker
Stick the orientating-time-date sticker on the constel-
lation plate.
Please note the direction of sticker.
Step 6: Insert the upper mounting plate
Put the three distance pieces into the holes in the up-
per mounting plate.
Please note the direction of sticker.
Step 7: Insert the star map
(8)
(6)
Tear off the transparent film in the constellation charts
Put the constellation chart under the notches of plate.
Step 8: Insert batteries
(7)
Put the battery, pay attention to the positive and negati-
ve poles. Make the positive pole match to the „+" mark,
the negative pole to the „-" mark.
Step 9: Insert the
(11+12)
Place the projector dome over the plate (as shown in
picture 11) please pay attention to the direction of pro-
jector dome.
(9+10)
semi-transparent projector dome
Advertisement
